home *** CD-ROM | disk | FTP | other *** search
/ Columbia Kermit / kermit.zip / newsgroups / misc.19960425-19960715 / 000400_news@columbia.edu _Wed Jul 10 12:37:41 1996.msg < prev    next >
Internet Message Format  |  2020-01-01  |  2KB

  1. Return-Path: news@columbia.edu
  2. Received: from apakabar.cc.columbia.edu (newsmaster.cc.columbia.edu [128.59.35.30]) by watsun.cc.columbia.edu (8.7.5/8.7.3) with ESMTP id MAA03574 for <kermit.misc@watsun.cc.columbia.edu>; Wed, 10 Jul 1996 12:37:41 -0400 (EDT)
  3. Received: (from news@localhost) by apakabar.cc.columbia.edu (8.7.5/8.7.3) id MAA26057 for kermit.misc@watsun; Wed, 10 Jul 1996 12:37:39 -0400 (EDT)
  4. Path: news.columbia.edu!watsun.cc.columbia.edu!fdc
  5. From: fdc@watsun.cc.columbia.edu (Frank da Cruz)
  6. Newsgroups: comp.protocols.kermit.misc
  7. Subject: Re: 28.8 baud modem on c-kermit?
  8. Date: 10 Jul 1996 16:37:35 GMT
  9. Organization: Columbia University
  10. Lines: 31
  11. Message-ID: <4s0m8f$pe7@apakabar.cc.columbia.edu>
  12. References: <vaenmm3qhm.fsf@conley.math.nwu.edu> <x7raql1nx2.fsf@unilab.dfci.harvard.edu>
  13. NNTP-Posting-Host: watsun.cc.columbia.edu
  14.  
  15. In article <x7raql1nx2.fsf@unilab.dfci.harvard.edu>,
  16. Richard Pieri  <ratinox@unilab.dfci.harvard.edu> wrote:
  17. : >>>>> "BR" == Bill Richter <richter@conley.math.nwu.edu> writes:
  18. : BR> I'm running cku190 on a Sun over a 28.8 baud modem.  I'd like to be
  19. : BR> able to put 
  20. : BR> set speed 28800
  21. : You cannot do it.  Sun does not support anything but the "even"
  22. : multiples of 2400/9600 (and I think the same applies to Kermit as well).
  23. : Try 'set speed 38400' instead; 38400 is the highest serial speed
  24. : supported by Sun.
  25. Right.  C-Kermit uses the device drivers of the underlying operating
  26. system.  If the operating system does not support a particular serial
  27. speed, there is no way that C-Kermit can support it.  In UNIX, you can
  28. find a list of the serial speeds supported by your UNIX version by
  29. locating the header file that contains the "baud" rate definitions.  You
  30. can usually find it like this:
  31.  
  32.   cd /usr/include
  33.   grep B9600 *.h sys/*.h
  34.  
  35. Once you've found the file, look in it for the list.  If you find any
  36. speeds in it that are not supported by C-Kermit, let me know.
  37.  
  38. Meanwhile, the original question is answered in item 17 of the Kermit FAQ:
  39.  
  40.   http://www.columbia.edu/kermit/faq.html
  41.   ftp://kermit.columbia.edu/kermit/faq.txt
  42.  
  43. - Frank